Base plates are available in blank versions or with three cut outs. The cut outs are modular and will accept cable entry brush, ventilation plate, blank plate or ventilation unit. With the 800mm width cabinets it is possible to use a blank plate or cable entry brush at the right and left of the bott...
In the 800mm version there is a base plate and room for options as shown in the table below.
The stiffener profiles are used to support the base plate in case the 19-inch profiles are mounted using depth posts for divided 19-inch.
Depending on the situation, you can choose optional modules for base or top cut-outs.
The thermostat measures the heat in the cabinet continuously and switches the fan unit MBM1007(B) on and off to maintain the desired temperature.
For higher cooling capacity we refer to chapter 14: Varicondition.
The thermostat can be used together with the following fans:
Triple fan unit MCS1004(B)
Double fan unit TRI.VE.00.02
MWE roof panel with built-in double fan unit MWEFP425, MWEFP525 and MWEFP625
The thermostat ensures that the fan is turned on at the temperature setting you select...
The thermostat can be used together with the following fans:
Triple fan unit MCS1007(B)
Double fan unit TRI.VE.00.02
MWE roof panel with built-in double fan unit MWEFP-425-UK, MWEFP-525-UK and MWEFP-625-UK.
The thermostat ensures that the fan is turned on at the temperature setti...