The fan unit is supplied with two built-in fans and cables. When mounted in the standard cut out of the base plate it forces the air through the cabinet. When mounted in the standard cut out of the top it draws the air flow out of the cabinet.
The thermostat measures the heat in the cabinet continuously and switches the fan unit MBM1004(B) on and off to maintain the desired temperature.
For higher cooling capacity we refer to chapter 14: Varicondition.
The fan unit contains three axial fans. The maximum flow is 480 m³/h, under normal load this will be over 300m³/h. All connections are of the IEC-320 C13 type. The fan units can be daisy chained using a standard cable with IEC-320 C13 / C14 connectors. All cables are included in the set.
...
The fan unit contains three axial fans. The maximum flow is 480 m³/h, under normal load this will be over 300m³/h. All connections are of the IEC-320 C13 type. The fan units can be daisy chained using a standard cable with IEC-320 C13 / C14 connectors. All cables are included in the set.
...
The thermostat can be used together with the following fans:
Triple fan unit MCS1004(B)
Double fan unit TRI.VE.00.02
MWE roof panel with built-in double fan unit MWEFP425, MWEFP525 and MWEFP625
The thermostat ensures that the fan is turned on at the temperature setting you select...
The thermostat can be used together with the following fans:
Triple fan unit MCS1004(B)
Double fan unit TRI.VE.00.02
MWE roof panel with built-in double fan unit MWEFP425, MWEFP525 and MWEFP625
The thermostat ensures that the fan is turned on at the temperature setting you select...