The Tripac is approved to IP Sealing Specification. The Tripac is provided with a set of 19-inch profiles, and two mounting profiles on the wall mounting plate. The cable can enter from either the top or bottom of the enclosure. A cylinder lock secures the front door. Inside the centre segment the l...
Extra profiles can be ordered, among other things for the installation of a server or a shelf. One set consists of two profiles.
Several perforated shelves are available for safe equipment installation. The shelves are attached to the 19-inch profiles. The cantilever types will be mounted at the front (standard) profiles only. The variable shelves have to be attached at the rear side on 19-inch profiles as well. An additional...
It is possible to use the following insert modules in your Duopac or Tripac enclosure. Please note if modules are used, the enclosure will not conform to IP Sealing Specification.
This fan unit can be mounted in your Tripac wall enclosure.
Optional, with the thermostat MWETF01 you can switch this fan unit automatically.
The thermostat can be used together with the following fans:
Triple fan unit MCS1004(B)
Double fan unit TRI.VE.00.02
MWE roof panel with built-in double fan unit MWEFP425, MWEFP525 and MWEFP625
The thermostat ensures that the fan is turned on at the temperature setting you select...
The thermostat can be used together with the following fans:
Triple fan unit MCS1004(B)
Double fan unit TRI.VE.00.02
MWE roof panel with built-in double fan unit MWEFP425, MWEFP525 and MWEFP625
The thermostat ensures that the fan is turned on at the temperature setting you select...