The universal server cabinets can be delivered within 24 hours, if ordered before 11.00 a.m. A distinction is made between stand-alone cabinets and co-location cabinets. Removeable side panels are supplied with the stand-alone cabinets. Instead of side panels, linking sets are supplied with the co-location cabinets.

Specifications

Available in RAL colours 9011 (black) and 7047 (grey).

Cabinets which are 1000 mm deep or more are fitted with 80%-perforated front and rear doors.

Cabinets which are 800 mm deep are fitted with a clear glass front door and a false rear door.

The doors are right-hung and fitted with a two-point Fix-easy swivel handle with an EK-333 cylinder lock.

There are three or four recesses in the top of the cabinet which are fitted with two or three protective plates and a cable bushing brush set.

The cabinets are fitted with four universal 19-inch profiles. These profiles are fitted 80 mm from the front of the cabinet and at 740 mm intervals as standard. In the case of the 800 mm-deep cabinets, the profiles nearest to the back are mounted at 87.5 mm.

The cabinets are supplied with 20 cage nuts and 20 decorative screws.

The cabinets are fully grounded.

The load-bearing capacity of the 800 mm-wide cabinets is 1000 kg (racks with 800mm depth) or 1500kg (racks with 1000 and 1200mm depth).

Accessory packs are available for these patch and server racks.

Application

The 800 mm-wide cabinets are very well suited for use with patching, network and server equipment.