The cable ducts are available in two versions: A narrow cable duct on the rear of the cabinet and a broad one across the middle of the cabinet.

The narrow cable duct is fitted to the cabinet's rear cable entry, which can be used to feed through limited numbers of cables, with which to connect the servers for instance.

The broad cable duct is fitted to the cabinet's middle cable entry, which means that it can be used to feed through large numbers of cables to the left and/or right of the cabinet, as required in patch cabinets. The broad cable duct is also equipped with a partition, which enables the segregation of fibre optic and copper cables from one another. The position of the partition is adjustable.

In the case of particularly large cabinets, the two systems - one narrow and one broad duct - can be combined to effectively create a threecompartment unit. This enables the adequate segregation of fibre optic, copper and power cables from one another.

The cable ducts are fitted with waterfalls to create the appropriate bend radius for the cables. This facilitates the process of feeding the cables in smoothly, while also holding them close to the sides of the cabinet, so that the equipment remains easily accessible.

The cable ducts are available in the colours RAL 7047 and RAL 9011.