Optimize energy efficiency

https://www.minkels.com/images/d3rAE/Airflow management_website.png

When developing Nexpand, one of our core goals was to provide you with the best airflow management solution to reduce your cooling costs to a minimum. The use of the correct airflow optimisation accessories leads to an enormous reduction in power usage. Minkels has developed accessories which provide concrete products for specific airflow optimisation needs.


White paper: Reducing data center costs and environmental impact

Download our airflow management whitepaper, and discover six top tips to enhance the energy efficiency of your data center. This whitepaper outlines essential measures every data center owner or decision-maker should consider when deploying IT cabinets. Download here

Best in-rack airflow management

Our airflow management pack seals the space between the vertical mounting rails (VMRs) and the side panels; our solution will cover every possible gap in a 600 mm wide or an 800 mm wide cabinet. For 800 mm wide cabinets, the side skirts feature 12 cutouts to place different accessories and allow cable entry from front to rear.


Covering all possible leaking points

In addition to sealing the space between the VMRs and the side panels, our airflow management package also seals between the VMRs and the top and bottom of the cabinet. The solution provides an airtight cabinet with the VMRs being mounted up to 250 mm inside the cabinet.

Unrivaled airtight accessories

Fill the cut-outs of your 800 mm airflow management package with blind plates if no cables need to go through. If cables do need to be guided through, you can choose the cable entry brush or take advantage of our innovative solution that uses foam.

Optimize energy efficiency products:

Cable entry panel with brush, 19-inch

Universal 19-inch cable entry panel. For use in all types of floor and wall enclosures.

Read more

Side plate

The side plate frame seals the area between height post and the side skirt (800mm wide cabinets) or the Vertical Mounting Rail (600mm wide cabinet).

Read more

Side skirts 19-inch with cutouts

The side-skirt seals the area between the Vertical Mounting Rails and optionally the side plate frame. It is mounted to the Vertical Mounting Rails.

Read more

Bottom and top plate for airflow management

The top & bottom airflow plates seal the area between the 19" and the front of the cabinet.

Read more

Front plate, Fix easy

The front plate is used for creating an airtight seal of the 19-inch surface. When this front plate was designed, the emphasis was on the ease of installation. The front plate can therefore be fitted in no time.

Read more

Plastic front panel 1U

The plastic front panel serves to seal off the 19-inch area so that it is airtight. The front panel have been specially designed to make installation easy and to form an airtight 19-inch seal.

Read more

Brush for side skirt

This cable entry accessory is to be placed in the side-skirts (part of the airflow package). The cable entry brush version provides cable throughput in a cost efficient manner.

Read more

Seal T-profile between cabinets

This strip is placed in a 3mm gap existing between 2 cabinet frames when placed one next to another.

Read more

Side skirts 19-inch without cutouts

The side-skirt seals the area between the Vertical Mounting Rails and optionally the side plate frame. These side-skirts are the blind version that do not include any cut-outs. These would be used as the cost-effective alternative to the version with cut-outs.

Read more

Plinth front/rear

This front-rear sheet metal plinth adds an increased level of air tightness to the Nexpand cabinet. Recommended when leveling feet are in use to achieve the best airflow control and prevent airflow leakage.

Read more

Switching & routing inlet duct

For the 1U and 2U switches Minkels developed an inlet duct. The equipment will be installed at the rear of the rack and will receive cold air from the front of the rack (Cold Aisle).

Read more

Cable entry foam for side skirt

This cable entry accessory is to be placed in the side-skirts (part of the airflow package). With the cable entry accessory in foam version we guarantee the highest degree of air tightness whilst providing cable throughput.

Read more

Sealing set

This sealing set is intended for sealing the gaps between the side plates or side skirts of connected racks. Use of this set ensures that no cold air can leak through to the back of the rack. The sealing set is available in 47U and 52U.

Read more

Blind plate for side skirt

These cable entry accessories are to be placed in the side-skirts (part of the airflow package). With the side skirt cover plate the not used cut-outs can be sealed.

Read more