This front-rear sheet metal plinth adds an increased level of air tightness to the Nexpand cabinet. Recommended when leveling feet are in use to achieve the best airflow control and prevent airflow leakage. These plinths can be used with the L shape protuding towards the outside of the cabinet to facilitate the floor tile alignment. Then it is possible to install them with the L shape inwards. Ending up with a seamless solution between cabinet and plinth.
Recommended to watch https://www.minkels.com/videos/nexpand/SuAwk9 from min 1:00 to 1:15 to clearly visualize this principle.
|A003B-000001-400-1||600 mm||White||Height is 0-25 mm|
|A003B-000001-900-1||600 mm||Black||Height is 0-25 mm|
|A003B-000002-400-1||800 mm||White||Height is 0-25 mm|
|A003B-000002-900-1||800 mm||Black||Height is 0-25 mm|
|A003B-000006-400-1||600 mm||White||Height is 22-47 mm|
|A003B-000006-900-1||600 mm||Black||Height is 22-47 mm|
|A003B-000007-400-1||800 mm||White||Height is 22-47 mm|
|A003B-000007-900-1||800 mm||Black||Height is 22-47 mm|